---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-RELEASE releng/15.0-n280995-7aedc8de6446 GENERIC powerpc
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT: init without driver.
cpu0: IBM POWER9 revision 2.3, 2700.00 MHz
cpu0: Features dc007182<PPC32,PPC64,ALTIVEC,FPU,MMU,SMT,ISNOOP,ARCH205,ARCH206,VSX,TRUELE>
cpu0: Features2 bee00000<ARCH207,DSCR,ISEL,TAR,VCRYPTO,ARCH300,IEEE128,DARN>
real memory  = 68358045696 (65191 MB)
avail memory = 62702821376 (59798 MB)
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
random: registering fast source PowerISA DARN random number generator
random: fast provider: "PowerISA DARN random number generator"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
opal0: <OPAL Abstraction Firmware> irq 1048560,1048561,1048562,1048563,1048564,1048565,1048567,1048568,1048569,1048570,1048571,1048572,1048573,1044478,1044479,1040382,1040383,1038334,1038335,1036286,1036287,1032190,1032191,1030142,1030143 on ofwbus0
opal0: registered as a time-of-day clock, resolution 0.002000s
simplebus0: <Flattened device tree simple bus> mem 0x6030000000000-0x60300ffffffff on ofwbus0
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff on ofwbus0
pci0: <OFW PCI bus> numa-domain 0 on pcib0
pcib1: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci0
pci1: <OFW PCI bus> numa-domain 0 on pcib1
pcib2: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff on ofwbus0
pci2: <OFW PCI bus> numa-domain 0 on pcib2
pcib3: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2
pci3: <OFW PCI bus> numa-domain 0 on pcib3
pcib4: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff on ofwbus0
pci4: <OFW PCI bus> numa-domain 0 on pcib4
pcib5: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4
pci5: <OFW PCI bus> numa-domain 0 on pcib5
pcib6: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff on ofwbus0
pci6: <OFW PCI bus> numa-domain 0 on pcib6
pcib7: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6
pci7: <OFW PCI bus> numa-domain 0 on pcib7
pcib8: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff on ofwbus0
pci8: <OFW PCI bus> numa-domain 0 on pcib8
pcib9: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <OFW PCI bus> numa-domain 0 on pcib9
pcib10: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff on ofwbus0
pci10: <OFW PCI bus> numa-domain 0 on pcib10
pcib11: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <OFW PCI bus> numa-domain 0 on pcib11
pcib12: <OFW PCI-PCI bridge> irq 1030136 at device 0.0 numa-domain 0 on pci11
pci12: <OFW PCI bus> numa-domain 0 on pcib12
xive0: <External Interrupt Virtualization Engine> mem 0x6030203180000-0x603020318ffff,0x6030203190000-0x603020319ffff,0x60302031a0000-0x60302031affff,0x60302031b0000-0x60302031bffff on ofwbus0
xivevc0: <External Interrupt Virtualization Engine Root> on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
pmcr0: <Power Management Control Register> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
cpufreq2: <CPU frequency control> on cpu2
cpufreq3: <CPU frequency control> on cpu3
opalcons0: <OPAL Consoles> on opal0
uart0: <OPAL Serial Port> on opalcons0
uart0: console
opalflash0: <OPAL System Flash> on opal0
opalsens0: <OPAL Sensors> on opal0
opal_sensor0: <OPAL sensor> on opalsens0
opal_sensor1: <OPAL sensor> on opalsens0
opal_sensor2: <OPAL sensor> on opalsens0
opal_sensor3: <OPAL sensor> on opalsens0
opal_sensor4: <OPAL sensor> on opalsens0
opal_sensor5: <OPAL sensor> on opalsens0
opal_sensor6: <OPAL sensor> on opalsens0
opal_sensor7: <OPAL sensor> on opalsens0
opal_sensor8: <OPAL sensor> on opalsens0
opal_sensor9: <OPAL sensor> on opalsens0
opal_sensor10: <OPAL sensor> on opalsens0
opal_sensor11: <OPAL sensor> on opalsens0
opal_sensor12: <OPAL sensor> on opalsens0
opal_sensor13: <OPAL sensor> on opalsens0
opal_sensor14: <OPAL sensor> on opalsens0
opal_sensor15: <OPAL sensor> on opalsens0
opal_sensor16: <OPAL sensor> on opalsens0
opal_sensor17: <OPAL sensor> on opalsens0
opal_sensor18: <OPAL sensor> on opalsens0
opal_sensor19: <OPAL sensor> on opalsens0
opal_sensor20: <OPAL sensor> on opalsens0
opal_sensor21: <OPAL sensor> on opalsens0
opal_sensor22: <OPAL sensor> on opalsens0
opal_sensor23: <OPAL sensor> on opalsens0
opal_sensor24: <OPAL sensor> on opalsens0
opal_sensor25: <OPAL sensor> on opalsens0
opal_sensor26: <OPAL sensor> on opalsens0
opal_sensor27: <OPAL sensor> on opalsens0
opal_sensor28: <OPAL sensor> on opalsens0
opal_sensor29: <OPAL sensor> on opalsens0
opal_sensor30: <OPAL sensor> on opalsens0
opal_sensor31: <OPAL sensor> on opalsens0
opal_sensor32: <OPAL sensor> on opalsens0
opal_sensor33: <OPAL sensor> on opalsens0
ahci0: <Marvell 88SE9235 AHCI SATA controller> mem 0x80000000-0x800007ff irq 1038328 at device 0.0 numa-domain 0 on pci5
ahci0: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x80000000-0x8000ffff,0x80010000-0x80011fff irq 1036280 at device 0.0 numa-domain 0 on pci7
xhci0: 64 bytes context size, 64-bit DMA
xhci0: xECP capabilities <LEGACY,PROTO,PROTO>
usbus0 numa-domain 0 on xhci0
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x6024000000000-0x602400000ffff,0x6024000010000-0x602400001ffff,0x6024000020000-0x602400002ffff irq 1032184 at device 0.0 numa-domain 0 on pci9
bge0: APE FW version: NCSI v0.6.0.18
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 2c:09:4d:00:0a:fa
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x6024000030000-0x602400003ffff,0x6024000040000-0x602400004ffff,0x6024000050000-0x602400005ffff irq 1032185 at device 0.1 numa-domain 0 on pci9
bge1: APE FW version: NCSI v0.6.0.18
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 2c:09:4d:00:0a:fb
bge2: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x6024000060000-0x602400006ffff,0x6024000070000-0x602400007ffff,0x6024000080000-0x602400008ffff irq 1032184 at device 0.2 numa-domain 0 on pci9
bge2: APE FW version: NCSI v0.6.0.18
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 2c:09:4d:00:0a:fc
vgapci0: <VGA-compatible display> mem 0x80000000-0x80ffffff,0x81000000-0x8101ffff irq 1030136 at device 0.0 numa-domain 0 on pci12
powernv_xscom0: <xscom> mem 0x603fc00000000-0x60403ffffffff on ofwbus0
opal_i2cm0: <centaur-i2cm> on powernv_xscom0
iichb0: <opal-i2c> on opal_i2cm0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0xa0
iichb1: <opal-i2c> on opal_i2cm0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xa0
opal_i2cm1: <centaur-i2cm> on powernv_xscom0
iichb2: <opal-i2c> on opal_i2cm1
iicbus2: <OFW I2C bus> on iichb2
iic2: <I2C generic I/O> on iicbus2
iicbus2: <unknown card> at addr 0xa0
opal_i2cm2: <centaur-i2cm> on powernv_xscom0
iichb3: <opal-i2c> on opal_i2cm2
iicbus3: <OFW I2C bus> on iichb3
iic3: <I2C generic I/O> on iicbus3
iicbus3: <unknown card> at addr 0xa0
iichb4: <opal-i2c> on opal_i2cm2
iicbus4: <OFW I2C bus> on iichb4
iic4: <I2C generic I/O> on iicbus4
iicbus4: <unknown card> at addr 0xa8
ossl0: <OpenSSL crypto> on nexus0
Timecounter "timebase" frequency 512000000 Hz quality 1000
Event timer "decrementer" frequency 512000000 Hz quality 1000
Timecounters tick every 1.000 msec
Launching APs: 1 10 7 13 9 6 8 5 12 14 11 3 2 15 4
usbus0: 5.0Gbps Super Speed USB v3.0
random: unblocking device.
Trying to mount root from ufs:/dev/ada0p2 []...
ugen0.1: <(0x104c) XHCI root HUB> at usbus0
uhub0 numa-domain 0 on usbus0
uhub0: <(0x104c) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <SD Ultra 3D 1TB 52046100> ACS-4 ATA SATA 3.x device
ada0: Serial Number 2547BB402396
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <Optiarc DVD RW AD-7240S 1.03> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada1 at ahcich3 bus 0 scbus3 target 0 lun 0
ada1: <SD Ultra 3D 1TB 52046100> ACS-4 ATA SATA 3.x device
ada1: Serial Number 2547BB402292
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <Logitech USB Keyboard> at usbus0
usbhid0 numa-domain 0 on uhub0
usbhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 1> on usbus0
hidbus0: <HID bus> numa-domain 0 on usbhid0
hkbd0: <Logitech USB Keyboard> numa-domain 0 on hidbus0
kbd1 at hkbd0
Root mount waiting for: usbus0
usbhid1 numa-domain 0 on uhub0
usbhid1: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 1> on usbus0
hidbus1: <HID bus> numa-domain 0 on usbhid1
ugen0.3: <Aspeed USB Virtual Hub> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <Aspeed USB Virtual Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus0
uhub1: 5 ports with 5 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <OpenBMC virtualinput> at usbus0
usbhid2 numa-domain 0 on uhub1
usbhid2: <OpenBMC virtualinput, class 0/0, rev 2.00/1.00, addr 3> on usbus0
hidbus2: <HID bus> numa-domain 0 on usbhid2
hkbd1: <OpenBMC virtualinput Keyboard> numa-domain 0 on hidbus2
kbd2 at hkbd1
usbhid3 numa-domain 0 on uhub1
usbhid3: <OpenBMC virtualinput, class 0/0, rev 2.00/1.00, addr 3> on usbus0
hidbus3: <HID bus> numa-domain 0 on usbhid3
hms0: <OpenBMC virtualinput Tablet> numa-domain 0 on hidbus3
hms0: 3 buttons and [XY] coordinates ID=0
ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 4> on usbus0
uhub2: MTT enabled
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.6: <vendor 0x0d8c USB Sound Device> at usbus0
uaudio0 numa-domain 0 on uhub2
uaudio0: <vendor 0x0d8c USB Sound Device, class 0/0, rev 1.10/0.10, addr 5> on usbus0
uaudio0: Play[0]: 48000 Hz, 4 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected)
uaudio0: Play[0]: 44100 Hz, 4 ch, 16-bit S-LE PCM format, 2x4ms buffer.
uaudio0: Record[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected)
uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer.
uaudio0: No MIDI sequencer.
pcm0 numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
Root mount waiting for: usbus0
ugen0.7: <SanDisk Ultra> at usbus0
umass0 numa-domain 0 on uhub0
umass0: <SanDisk Ultra, class 0/0, rev 3.00/1.00, addr 6> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4001<NO_TEST_UNIT_READY,NO_SYNCHRONIZE_CACHE>
umass0:4:0: Attached to scbus4
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <SanDisk Ultra 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 4C531001330627122512
da0: 400.000MB/s transfers
da0: 14875MB (30464000 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
uhub_explore: illegal enable change, port 1
GEOM_PART: integrity check failed (da0, APM)
GEOM_PART: integrity check failed (iso9660/15_0_RELEASE_POWERPC64LE_CD, APM)
GEOM_PART: integrity check failed (diskid/DISK-4C531001330627122512, APM)
hcons0: <Logitech USB Keyboard Consumer Control> numa-domain 0 on hidbus1
hsctrl0: <Logitech USB Keyboard System Control> numa-domain 0 on hidbus1
hcons1: <Logitech USB Keyboard Consumer Control> numa-domain 0 on hidbus1
icee0: <AT24C512> at addr 0xa0 on iicbus0
icee1: <AT24C128> at addr 0xa0 on iicbus1
icee2: <AT24C128> at addr 0xa0 on iicbus2
lo0: link state changed to UP
lo0: link state changed to DOWN
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
arp: 217.197.81.1 moved from 32:09:3c:f5:24:aa to 00:00:5e:00:01:01 on bge0
lo0: link state changed to DOWN
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
arp: 217.197.81.1 moved from 32:09:3c:f5:24:aa to 00:00:5e:00:01:01 on bge0